Wiring the Imagination Dollhouse - Slideshow 2
This slideshow augments but does not replace
the house assembly instructions
DHTMLGoodies.com
Saw a slot in both eave blocks for tapewire. Do this on both Sides of the house
WiringAssets/047_lg.jpg
Saw a slot in both eave blocks for tapewire. Do this on both Sides of the house
WiringAssets/047_lg.jpg
DHTMLGoodies.com
Tape together the Roofs at the peak and set them on the house
WiringAssets/052_lg.jpg
Tape together the Roofs at the peak and set them on the house
WiringAssets/052_lg.jpg
DHTMLGoodies.com
The screw will go in straight even if the hole doesn't line up exactly (that's why you taped the peak first)
WiringAssets/054_lg.jpg
The screw will go in straight even if the hole doesn't line up exactly (that's why you taped the peak first)
WiringAssets/054_lg.jpg
DHTMLGoodies.com
Lift the right end of the Roof and put the tapewire into the saw slots
WiringAssets/063_lg.jpg
Lift the right end of the Roof and put the tapewire into the saw slots
WiringAssets/063_lg.jpg
DHTMLGoodies.com
Tape the Roofs across the peak, then finish the Front Roof Screws
WiringAssets/071_lg.jpg
Tape the Roofs across the peak, then finish the Front Roof Screws
WiringAssets/071_lg.jpg
